
Z SERIES
Z600Permanent Magnet Variable Frequency Booster Pump
The Z600 is the 0.55 kW mid model of the Z family of stainless boosters — Z400 and Z600 share one 5.3 kg frame, stepping up from 0.4 to 0.55 kW. The Z600 moves 50 L/min to 40 m through 1-inch ports. Its 9 m suction lift, the joint deepest in the range, reaches low tanks and shallow wells, with a copper impeller and stainless body on a ceramic shaft and bearing. A 3 L/min minimum inlet flow keeps it stable on small draws.
- Moc znamionowa
- 0.55 kW
- Maksymalny przepływ
- 50 L/min
- Maksymalna wysokość podnoszenia
- 40 m
- Zasilanie
- 170 - 260 V, 50/60 Hz
Kluczowe zalety
- 9 m suction lift — joint deepest in the range, for low tanks and shallow wells.
- Copper impeller in a stainless precision-cast body, on a ceramic shaft and bearing.
- 50 L/min and 40 m of head — the mid model of the Z family, for longer pipe runs than the Z400 covers.
- 3 L/min minimum inlet flow, so the pump stays stable on small draws.
Energy saving of 60% or more against a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.
Dane techniczne
Electrical
- Moc znamionowa
- 0.55 kW
- Zasilanie
- 170 - 260 V, 50/60 Hz
Hydraulic
- Maksymalny przepływ
- 50 L/min
- Maksymalna wysokość podnoszenia
- 40 m
- Maximum suction lift
- 9 m
- Hałas
- ≤ 55 dB
- Wlot
- 1 in (25 mm)
- Wylot
- 1 in (25 mm) (same as inlet)
Construction and environment
- Pump body and wetted parts
- Stainless steel · Ceramic shaft and bearing
- Motor type
- Permanent magnet motor with integrated variable frequency drive
- Liquid temperature range
- 5–70 °C, pH 6.5–8.5
- Ambient temperature range
- 0–40 °C, RH max. 85%
- Solids in the liquid
- No solid particles or fibres (smaller than 0.2 mm)
Model data
Values as published for this model range.
| Model | Moc (kW) | Moc (HP) | Prąd (A) | Qmax (L/min) | Hmax (m) | Suct. max (m) |
|---|---|---|---|---|---|---|
| Z600 | 0.55 | 0.75 | 4 | 50 | 40 | 9 |
Krzywa wydajności
Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi.
Warunki pracy
Limity pracy i warunki medium opublikowane dla tego modelu.
- Pompowana ciecz
- Clean, thin, non-solidifying, non-flammable and non-explosive liquid
- Solids
- No solid particles or fibres (smaller than 0.2 mm)
- Liquid temperature
- 5–70 °C, pH 6.5–8.5
- Temperatura otoczenia
- 0–40 °C, RH max. 85%
- Max. working pressure
- 10 bar
- Minimum inlet flow
- 3 L/min
- Hałas
- ≤ 55 dB
Wymiar całkowity
All dimensions in millimetres unless stated otherwise. Dimension references Width a, Height b, Depth c, Port offset d, Port offset e are printed on catalog page 20.
| Model | Wymiary | Waga |
|---|---|---|
| Z600 |
| 5.3 kg |
Zastosowania
Home boosting from low tanks and shallow wells — the 9 m suction lift reaches water other small boosters cannot, with more head for longer pipe runs.
- Podnoszenie ciśnienia w całym domu
- Rooftop Tank & Water Tower Boosting
- Nawadnianie ogrodu
Uwagi dotyczące instalacji
- Liquid condition: No solid particles or fibres (smaller than 0.2 mm).
Opakowanie
Informacje o pakowaniu opublikowane dla tego modelu.
- Opakowanie
- Carton with Plywood Tray
- Rozmiar kartonu
- 21.5 × 16.3 × 21 cm
- Waga brutto
- 5.3 kg
Informacje o zamawianiu
Ordering information for this model.
- MOQ and packaging
- Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
- Lead time
- 30 days
- OEM / ODM
- Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
- Przyłącze
- 1 in (25 mm)
Warranty: 2 yearsGwarancja i serwis posprzedażowy
Wskazówki doboru
Jak Z600 jest zestawiona z resztą oferty.
- Choose Z600 for a single dwelling on a tank or shallow well with 9 m suction and up to 40 m of head, or for longer pipe runs than the Z400 covers.
- Keep the inlet flow above 3 L/min and the working pressure within 10 bar.
Zasilanie i oznakowanie CE
Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.
Pliki do pobrania
Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.
kartę katalogową
Model, key specifications, power stage data and packing details generated from the catalog data on this page.
Performance Curve
Head and flow curve for this model, redrawn from the catalog axis ranges.
Dimension Data
Dimension table for each model in the range, in millimetres and inches.
Praca nad a Z600 projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.