Skip to main content

SPS90 SERIES

SPS90-3Permanent Magnet VFD Booster Pump

The SPS90-3 is the taller-house step up from the SPS-90. Where the SPS-90 stops at 32 m, this model reaches 45 m of head, with three stainless impellers in a stainless precision-cast body and a ceramic shaft and bearing. Five power stages from 0.27 to 0.58 kW cover 25 to 45 m at up to 70 L/min, through 1-inch ports with 7 m of suction lift. At 9.5 kg it is a heavier, higher-head machine for villas and duplexes, running on standard single-phase 170–250 V.

Moc znamionowa
0,27–0,58 kW (regulacja 5-stopniowa)
Maksymalny przepływ
4.2 m³/h (18.5 GPM)
Maksymalna wysokość podnoszenia
45 m (148 ft)
Zasilanie
170 - 250 V, 50/60 Hz
Pobierz kartę katalogową (PDF) Zamów próbkę
Stainless Body & Impellers45 m HeadFive Power Stages3 Stainless Impellers7 m Suction Lift170–250 V Wide Voltage

Kluczowe zalety

  • Three stainless impellers in a stainless precision-cast body — all wetted metal parts are stainless steel.
  • 45 m of head against the SPS-90's 32 m, for taller villas and duplexes on the same supply.
  • Five power stages (0.27–0.58 kW) cover 25–45 m, so one model serves several higher-head duties.
  • 1-inch ports with 7 m suction lift for tank supply below the pump.

Energy use falls by 60% or more versus a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.

Dane techniczne

Electrical

Moc znamionowa
0,27–0,58 kW (regulacja 5-stopniowa)
Power stages
5 adjustable power stages
Zasilanie
170 - 250 V, 50/60 Hz

Hydraulic

Maksymalny przepływ
4.2 m³/h (18.5 GPM)
Maksymalna wysokość podnoszenia
45 m (148 ft)
Maximum working pressure
10 bar (145 psi)
Maximum suction lift
7 m (23 ft)
Hałas
≤ 55 dB
Wlot
1 in (25 mm)
Wylot
1 in (25 mm) (same as inlet)

Construction and environment

Pump body and wetted parts
Stainless steel · Ceramic shaft and bearing
Motor type
Permanent magnet motor with integrated variable frequency drive
Liquid temperature range
5 - 70 °C, pH 6.5 - 8.5
Ambient temperature range
0 - 40 °C, humidity up to 85%
pH range
pH 6.5 - 8.5
Solids in the liquid
No particles or fibres larger than 0.2 mm
Pompowana ciecz
Thin, clean, non-solidifying, non-flammable liquid

SPS90-3 power stage data

Flow and head at each power stage for this model.

StopieńMoc (kW)Power max (kW)Prąd (A)Maks. przepływ (L/min)Maks. wysokość podnoszenia (m)Ssanie (m)
Power 10.270.585.570 L/min (4.2 m³/h)25 m (82 ft)7 m (23 ft)
Power 20.330.585.570 L/min (4.2 m³/h)30 m (98 ft)7 m (23 ft)
Power 30.410.585.570 L/min (4.2 m³/h)35 m (115 ft)7 m (23 ft)
Power 40.490.585.570 L/min (4.2 m³/h)40 m (131 ft)7 m (23 ft)
Power 50.580.585.570 L/min (4.2 m³/h)45 m (148 ft)7 m (23 ft)

Krzywa wydajności

Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi i imperialnymi.

Krzywa wydajności · SPS90-3Wysokość podnoszenia względem wydajności, osie metryczne i imperialne
0 m (0 ft)10 m (33 ft)20 m (66 ft)30 m (98 ft)40 m (131 ft)50 m (164 ft)0 L/min0.0 GPM20 L/min5.3 GPM40 L/min10.6 GPM60 L/min15.9 GPM70 L/min18.5 GPMWydajność Q (L/min)Head H (m and ft)
Power 5Power 4Power 3Power 2Power 1

Wymiar całkowity

All dimensions in millimetres unless stated otherwise. Dimension references Outlet, Inlet, Body width, Body height are printed on catalog page 10.

Model Wymiary Waga
SPS90-3
  • Wlot 1 inch
  • Wylot 1 inch
  • a 284 mm
  • b 195 mm
  • c 333 mm
  • d 248 mm
  • e 56 mm
  • f 18 mm
  • g 157 mm
9.5 kg

Zastosowania

Villa and duplex boosting where the SPS-90's 32 m is not enough — taller homes on mains or tank supply.

  • Podnoszenie ciśnienia w całym domu
  • Rooftop Tank & Water Tower Boosting
  • Wille i domy wielopiętrowe
SPS90-3 stainless steel booster pump with top-mounted pressure vessel and control panel
SPS90-3 stainless booster

Uwagi dotyczące instalacji

  • 70 L/min, 25–45 m head
  • Five power stages, 1-inch ports
  • Stainless steel housing
  • Liquid condition: No particles or fibres larger than 0.2 mm.

Opakowanie

Informacje o pakowaniu opublikowane dla tego modelu.

Opakowanie
Carton with plywood tray
Rozmiar kartonu
32.5 × 33.5 × 37 cm
Waga brutto
9.5 kg

Informacje o zamawianiu

Ordering information for this model.

MOQ and packaging
Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
Lead time
30 days
OEM / ODM
Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
Przyłącze
1 in (25 mm)

Warranty: 2 yearsGwarancja i serwis posprzedażowy

Zasilanie i oznakowanie CE

Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.

Pliki do pobrania

Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.

  • kartę katalogową

    Model, key specifications, power stage data and packing details generated from the catalog data on this page.

  • Performance Curve

    Head and flow curve for this model, redrawn from the catalog axis ranges.

  • Dimension Data

    Dimension table for each model in the range, in millimetres and inches.

Praca nad an SPS90-3 projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.

Używamy plików cookie

Niezbędne pliki są potrzebne do działania strony. Pliki cookie analityczne są ustawiane dopiero po kliknięciu „Akceptuj”. W przypadku odmowy nie są ustawiane żadne pliki cookie analityczne. Informacja o plikach cookie