Skip to main content

ICP SERIES

ICP106FPM VFD Smart Booster Pump

The ICP106F takes the ICP100F formula one step further: the same 0.75 kW stage and 86 L/min, but 42 m of head instead of 38 m, and a 9 m suction lift — the deepest suction of any pump in the range. It is the model for sources that sit lower than other boosters can reach. Constant pressure is settable from 10 to 30 m, the cast-iron body holds a plastic impeller, and the 9.8 kg unit runs on 170–250 V with fault diagnosis, alarm and self-check built in.

Moc znamionowa
0.75 kW (1.0 HP)
Maksymalny przepływ
5.2 m³/h (22.7 GPM)
Maksymalna wysokość podnoszenia
42 m (138 ft)
Zasilanie
170 - 250 V, 50/60 Hz
Pobierz kartę katalogową (PDF) Zamów próbkę
Self-Priming 9 mDeepest Suction in Range42 m HeadSettable Pressure 10–30 mCast-Iron Body170–250 V Wide Voltage

Kluczowe zalety

  • 9 m suction lift — the deepest in the range, reaching sources 8 m models cannot.
  • 42 m of head at the same 0.75 kW and 86 L/min as the ICP100F, for taller houses on the same supply.
  • Constant pressure settable from 10 to 30 m, matched to the house rather than fixed by the pump.
  • Cast-iron body with dry-run and overload protection, reaching sources 9 m below the pump.

Delivers the same duty with 60% or more less energy than a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.

Dane techniczne

Electrical

Moc znamionowa
0.75 kW (1.0 HP)
Zasilanie
170 - 250 V, 50/60 Hz

Hydraulic

Maksymalny przepływ
5.2 m³/h (22.7 GPM)
Maksymalna wysokość podnoszenia
42 m (138 ft)
Maximum working pressure
10 bar (145 psi)
Maximum suction lift
9 m (30 ft)
Wlot
1 in (25 mm)
Wylot
1 in (25 mm) (same as inlet)

Construction and environment

Motor type
Permanent magnet motor with integrated variable frequency drive
Liquid temperature range
5 - 70 °C, pH 6.5 - 8.5
Ambient temperature range
0 - 40 °C, humidity up to 85%
pH range
pH 6.5 - 8.5
Solids in the liquid
No particles or fibres larger than 0.2 mm
Pompowana ciecz
Thin, clean, non-solidifying, non-flammable liquid

Model data

Values as published for this model range.

ModelMoc (kW)HPPrąd (A)Qmax (L/min)Hmax (m)Ssanie (m)
ICP106F0.751.03.886429

Krzywa wydajności

Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi i imperialnymi.

Krzywa wydajności · ICP106FWysokość podnoszenia względem wydajności, osie metryczne i imperialne
0 m (0 ft)10 m (33 ft)20 m (66 ft)30 m (98 ft)40 m (131 ft)42 m (138 ft)0 L/min0.0 GPM20 L/min5.3 GPM40 L/min10.6 GPM60 L/min15.9 GPM80 L/min21.1 GPM87 L/min23.0 GPMWydajność Q (L/min)Head H (m and ft)
ICP106F

Q-H grid data

Seria0 L/min (0 m³/h)13 L/min (0.8 m³/h)22 L/min (1.3 m³/h)34 L/min (2 m³/h)47 L/min (2.8 m³/h)60 L/min (3.6 m³/h)75 L/min (4.5 m³/h)87 L/min (5.2 m³/h)
H (m)42 m (138 ft)40 m (131 ft)38 m (125 ft)36 m (118 ft)33 m (108 ft)28 m (92 ft)22 m (72 ft)14 m (46 ft)

Wymiar całkowity

All dimensions in millimetres unless stated otherwise. Dimension references Overall length, Overall width, Overall height, Port offset are printed on catalog page 12.

Model Wymiary Waga
ICP106F
  • Wlot 1 inch
  • Wylot 1 inch
  • a 271 mm
  • d 191 mm
  • g 186 mm
  • h 298 mm
9.8 kg

Zastosowania

Deep-well and low-tank supply where 8 m of suction is not enough — the 9 m lift reaches sources other home boosters cannot.

  • Wille i domy wielopiętrowe
  • Rooftop Tank & Water Tower Boosting
  • Podnoszenie ciśnienia w całym domu

Uwagi dotyczące instalacji

  • Liquid condition: No particles or fibres larger than 0.2 mm.

Opakowanie

Informacje o pakowaniu opublikowane dla tego modelu.

Opakowanie
Carton with plywood tray
Rozmiar kartonu
32.5 × 23.5 × 34.5 cm
Waga netto
9.8 kg

Informacje o zamawianiu

Ordering information for this model.

MOQ and packaging
Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
Lead time
30 days
OEM / ODM
Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
Przyłącze
1 in (25 mm)

Warranty: 2 yearsGwarancja i serwis posprzedażowy

Zasilanie i oznakowanie CE

Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.

Pliki do pobrania

Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.

  • kartę katalogową

    Model, key specifications, power stage data and packing details generated from the catalog data on this page.

  • Performance Curve

    Head and flow curve for this model, redrawn from the catalog axis ranges.

  • Dimension Data

    Dimension table for each model in the range, in millimetres and inches.

Praca nad an ICP106F projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.

Używamy plików cookie

Niezbędne pliki są potrzebne do działania strony. Pliki cookie analityczne są ustawiane dopiero po kliknięciu „Akceptuj”. W przypadku odmowy nie są ustawiane żadne pliki cookie analityczne. Informacja o plikach cookie