Skip to main content

ICP SERIES

ICP100FPM VFD Smart Booster Pump

The ICP100F is built for houses whose water sits below the pump. Its 8 m self-priming lift draws from a cistern or shallow well, and its constant pressure can be set anywhere from 10 to 30 m to match the house. A single 0.75 kW permanent magnet stage delivers 86 L/min at up to 38 m of head through 1-inch ports, with a cast-iron body and a plastic impeller. Intelligent fault diagnosis alarms and self-checks, and dry-run and overload protection guard the pump when the source runs low.

Moc znamionowa
0.75 kW (1.0 HP)
Maksymalny przepływ
5.2 m³/h (22.7 GPM)
Maksymalna wysokość podnoszenia
38 m (125 ft)
Zasilanie
170 - 250 V, 50/60 Hz
Pobierz kartę katalogową (PDF) Zamów próbkę
Self-Priming 8 mSettable Pressure 10–30 m86 L/min38 m HeadCast-Iron Body170–250 V Wide Voltage

Kluczowe zalety

  • 8 m self-priming lift — draws from a cistern or shallow well below the pump, where non-priming boosters cannot work.
  • Constant pressure settable from 10 to 30 m, so the outlet pressure is chosen for the house, not fixed by the pump.
  • 86 L/min at up to 38 m of head from a single 0.75 kW stage, through 1-inch ports.
  • Cast-iron body with dry-run and overload protection, drawing from a tank or a well at 8 m of suction.

Cuts energy use by 60% or more against a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.

Dane techniczne

Electrical

Moc znamionowa
0.75 kW (1.0 HP)
Zasilanie
170 - 250 V, 50/60 Hz

Hydraulic

Maksymalny przepływ
5.2 m³/h (22.7 GPM)
Maksymalna wysokość podnoszenia
38 m (125 ft)
Maximum working pressure
10 bar (145 psi)
Maximum suction lift
8 m (26 ft)
Wlot
1 in (25 mm)
Wylot
1 in (25 mm) (same as inlet)

Construction and environment

Motor type
Permanent magnet motor with integrated variable frequency drive
Liquid temperature range
5 - 70 °C, pH 6.5 - 8.5
Ambient temperature range
0 - 40 °C, humidity up to 85%
pH range
pH 6.5 - 8.5
Solids in the liquid
No particles or fibres larger than 0.2 mm
Pompowana ciecz
Thin, clean, non-solidifying, non-flammable liquid

Model data

Values as published for this model range.

ModelMoc (kW)HPPrąd (A)Qmax (L/min)Hmax (m)Ssanie (m)
ICP100F0.751.03.886388

Krzywa wydajności

Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi i imperialnymi.

Krzywa wydajności · ICP100FWysokość podnoszenia względem wydajności, osie metryczne i imperialne
0 m (0 ft)7 m (23 ft)14 m (46 ft)21 m (69 ft)28 m (92 ft)35 m (115 ft)38 m (125 ft)0 L/min0.0 GPM20 L/min5.3 GPM40 L/min10.6 GPM60 L/min15.9 GPM80 L/min21.1 GPM87 L/min23.0 GPMWydajność Q (L/min)Head H (m and ft)
ICP100F

Q-H grid data

Seria0 L/min (0 m³/h)13 L/min (0.8 m³/h)22 L/min (1.3 m³/h)34 L/min (2 m³/h)47 L/min (2.8 m³/h)60 L/min (3.6 m³/h)75 L/min (4.5 m³/h)87 L/min (5.2 m³/h)
H (m)38 m (125 ft)36 m (118 ft)34 m (112 ft)32 m (105 ft)29 m (95 ft)24 m (79 ft)18 m (59 ft)10 m (33 ft)

Wymiar całkowity

All dimensions in millimetres unless stated otherwise. Dimension references Overall length, Overall height, Base width, Port height are printed on catalog page 11.

Model Wymiary Waga
ICP100F
  • Wlot 1 inch
  • Wylot 1 inch
  • a 230 mm
  • d 144 mm
  • g 166 mm
  • h 278 mm
8.0 kg

Zastosowania

Tank and well supply where the water source sits below the pump — houses on cisterns, shallow wells and rooftop tanks.

  • Rooftop Tank & Water Tower Boosting
  • Podnoszenie ciśnienia w całym domu
  • Wille i domy wielopiętrowe

Uwagi dotyczące instalacji

  • Liquid condition: No particles or fibres larger than 0.2 mm.

Opakowanie

Informacje o pakowaniu opublikowane dla tego modelu.

Opakowanie
Carton with plywood tray
Rozmiar kartonu
29.7 × 17.9 × 30.8 cm
Waga netto
8.0 kg

Informacje o zamawianiu

Ordering information for this model.

MOQ and packaging
Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
Lead time
30 days
OEM / ODM
Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
Przyłącze
1 in (25 mm)

Warranty: 2 yearsGwarancja i serwis posprzedażowy

Zasilanie i oznakowanie CE

Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.

Pliki do pobrania

Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.

  • kartę katalogową

    Model, key specifications, power stage data and packing details generated from the catalog data on this page.

  • Performance Curve

    Head and flow curve for this model, redrawn from the catalog axis ranges.

  • Dimension Data

    Dimension table for each model in the range, in millimetres and inches.

Praca nad an ICP100F projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.

Używamy plików cookie

Niezbędne pliki są potrzebne do działania strony. Pliki cookie analityczne są ustawiane dopiero po kliknięciu „Akceptuj”. W przypadku odmowy nie są ustawiane żadne pliki cookie analityczne. Informacja o plikach cookie