Skip to main content

ICP SERIES

ICP100AIntelligent Centrifugal Pump

The ICP100A is the high-flow member of the ICP centrifugal line, moving up to 102 L/min through 1-inch ports — the highest flow of any 1-inch model in the range. Its five stages run from 0.3 to 0.75 kW and cover 22 to 38 m of head, so a single model serves small houses, duplexes and flats. A cast-iron body keeps the 4.5 kg unit the lightest of the ICP centrifugal models, and 7 m of suction lift lets it draw from a tank below the pump.

Moc znamionowa
0.3 - 0.75 kW (0.4 - 1 HP)
Maksymalny przepływ
6.1 m³/h (26.9 GPM)
Maksymalna wysokość podnoszenia
38 m (125 ft)
Zasilanie
170 - 250 V, 50/60 Hz
Pobierz kartę katalogową (PDF) Zamów próbkę
Five Power Stages102 L/min Max Flow7 m Suction LiftCast-Iron BodyStałe ciśnienie170–250 V Wide Voltage

Kluczowe zalety

  • 102 L/min maximum flow — the highest of any 1-inch model in the range, for homes where several outlets run at once.
  • Five power stages (0.3–0.75 kW) cover 22–38 m of head, so one stocked model serves several duty points.
  • Lightest ICP centrifugal model at 4.5 kg, with a cast-iron body and 1-inch ports for a standard riser.
  • 7 m suction lift for tank supply below the pump, plus dry-run and overload protection.

Uses 60% less energy or more than a same-power conventional fixed-speed pump running at the same flow/head duty point under constant-pressure conditions.

Dane techniczne

Electrical

Moc znamionowa
0.3 - 0.75 kW (0.4 - 1 HP)
Power stages
5 adjustable power stages
Zasilanie
170 - 250 V, 50/60 Hz

Hydraulic

Maksymalny przepływ
6.1 m³/h (26.9 GPM)
Maksymalna wysokość podnoszenia
38 m (125 ft)
Maximum working pressure
10 bar (145 psi)
Maximum suction lift
7 m (23 ft)
Wlot
1 in (25 mm)
Wylot
1 in (25 mm) (same as inlet)

Construction and environment

Motor type
Permanent magnet motor with integrated variable frequency drive
Liquid temperature range
5 - 70 °C, pH 6.5 - 8.5
Ambient temperature range
0 - 40 °C, humidity up to 85%
pH range
pH 6.5 - 8.5
Solids in the liquid
No particles or fibres larger than 0.2 mm
Pompowana ciecz
Thin, clean, non-solidifying, non-flammable liquid

ICP100A power stage data

Flow and head at each power stage for this model.

StopieńMoc (kW)Moc (HP)Prąd (A)Maks. przepływ (L/min)Maks. wysokość podnoszenia (m)Ssanie (m)
Power-10.30.42.275 L/min (4.5 m³/h)22 m (72 ft)7 m (23 ft)
Power-20.40.552.883 L/min (5 m³/h)27 m (89 ft)7 m (23 ft)
Power-30.50.663.592 L/min (5.5 m³/h)31 m (102 ft)7 m (23 ft)
Power-40.60.84.295 L/min (5.7 m³/h)36 m (118 ft)7 m (23 ft)
Power-50.7515.2102 L/min (6.1 m³/h)38 m (125 ft)7 m (23 ft)

Krzywa wydajności

Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi i imperialnymi.

Krzywa wydajności · ICP100AWysokość podnoszenia względem wydajności, osie metryczne i imperialne
0 m (0 ft)7 m (23 ft)14 m (46 ft)21 m (69 ft)28 m (92 ft)35 m (115 ft)40 m (131 ft)0 L/min0.0 GPM20 L/min5.3 GPM40 L/min10.6 GPM60 L/min15.9 GPM80 L/min21.1 GPM100 L/min26.4 GPM105 L/min27.7 GPMWydajność Q (L/min)Head H (m and ft)
Power 5Power 4Power 3Power 2Power 1

Q-H grid data

Seria0 m³/h (0 L/min)0.5 m³/h (8 L/min)1 m³/h (16 L/min)1.5 m³/h (25 L/min)2 m³/h (33 L/min)2.5 m³/h (42 L/min)3 m³/h (50 L/min)3.5 m³/h (58 L/min)4 m³/h (66 L/min)4.5 m³/h (75 L/min)5 m³/h (83 L/min)5.5 m³/h (92 L/min)
Power 1 (m)22 m (72 ft)19 m (62 ft)17 m (56 ft)16 m (52 ft)15 m (49 ft)14 m (46 ft)12 m (39 ft)10 m (33 ft)8 m (26 ft)7 m (23 ft)
Power 2 (m)27 m (89 ft)25 m (82 ft)24 m (79 ft)23 m (75 ft)20 m (66 ft)18 m (59 ft)16 m (52 ft)14 m (46 ft)13 m (43 ft)10 m (33 ft)8 m (26 ft)
Power 3 (m)31 m (102 ft)28 m (92 ft)27 m (89 ft)26 m (85 ft)23 m (75 ft)22 m (72 ft)20 m (66 ft)17 m (56 ft)15 m (49 ft)13 m (43 ft)11 m (36 ft)8 m (26 ft)
Power 4 (m)36 m (118 ft)34 m (112 ft)32 m (105 ft)30 m (98 ft)27 m (89 ft)26 m (85 ft)24 m (79 ft)23 m (75 ft)20 m (66 ft)17 m (56 ft)14 m (46 ft)12 m (39 ft)
Power 5 (m)38 m (125 ft)36 m (118 ft)35 m (115 ft)33 m (108 ft)32 m (105 ft)29 m (95 ft)27 m (89 ft)25 m (82 ft)20 m (66 ft)20 m (66 ft)14 m (46 ft)8 m (26 ft)
Przesuń tabelę w bok, aby zobaczyć wszystkie kolumny.

Wymiar całkowity

All dimensions in millimetres unless stated otherwise. Dimension references Body length, Body height, Port size, Base spacing are printed on catalog page 16.

Model Wymiary Waga
ICP100A
  • Wlot 1 inch
  • Wylot 1 inch
  • a 175 mm
  • b 27 mm
  • d 156 mm
  • e 93 mm
  • f 7 mm
  • g 71 mm
  • h 194 mm
4.5 kg

Zastosowania

Home boosting where one pump must cover several duty points — small houses, duplexes and flats with changing tap demand.

  • Podnoszenie ciśnienia w całym domu
  • Wille i domy wielopiętrowe
  • Rooftop Tank & Water Tower Boosting

Uwagi dotyczące instalacji

  • Liquid condition: No particles or fibres larger than 0.2 mm.

Opakowanie

Informacje o pakowaniu opublikowane dla tego modelu.

Opakowanie
Carton with plywood tray
Rozmiar kartonu
21 × 17 × 22 cm
Waga netto
4.5 kg

Informacje o zamawianiu

Ordering information for this model.

MOQ and packaging
Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
Lead time
30 days
OEM / ODM
Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
Przyłącze
1 in (25 mm)

Warranty: 2 yearsGwarancja i serwis posprzedażowy

Zasilanie i oznakowanie CE

Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.

Pliki do pobrania

Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.

  • kartę katalogową

    Model, key specifications, power stage data and packing details generated from the catalog data on this page.

  • Performance Curve

    Head and flow curve for this model, redrawn from the catalog axis ranges.

  • Dimension Data

    Dimension table for each model in the range, in millimetres and inches.

Praca nad an ICP100A projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.

Używamy plików cookie

Niezbędne pliki są potrzebne do działania strony. Pliki cookie analityczne są ustawiane dopiero po kliknięciu „Akceptuj”. W przypadku odmowy nie są ustawiane żadne pliki cookie analityczne. Informacja o plikach cookie