MT24-25
DC booster for tap, shower and rooftop tank supply
- 25 L/min, 25 m head
- 1 kg, IP65, 15 mm ports
- Mobile all-rounder for RVs
DC 24 V · Off-Grid Water Supply
Three 200 W pipeline boosters that run on 24 V DC from a battery or solar supply — or on mains through the supplied adapter. One kilogram, IP65, and built for RVs, solar-water systems and water heaters.
The DC family
Every DC model delivers 25 L/min at 25 m of head from a 200 W motor, in a 1 kg reinforced-nylon body with IP65 protection and 15 mm ports. The difference is the fitting and the control, not the duty.
DC booster for tap, shower and rooftop tank supply
DC constant pressure booster with single button control
Second generation smart booster with two button control
All three models sit in the DC pipeline booster group , with full specifications, Q-H curves and application notes on each model page.
How they run
The DC family is built for places mains pumps cannot go. The same pump covers an off-grid install and a mains install, because the power input is the only thing that changes.
Runs on 24 V DC from a battery or solar supply — the off-grid answer for RVs, solar-water systems and water heaters.
The supplied adapter accepts AC 110 V / 220 V input, so the same pump runs on mains where mains is available.
The pump starts and stops automatically with demand, holding constant pressure on the line without a separate controller.
A reinforced-nylon body at 1 kg with IP65 protection suits mobile and outdoor duty, on 15 mm ports.
Questions
Yes, from a 24 V DC supply. The DC family runs directly on 24 V DC from a battery or solar supply, which is how they are used in RVs, solar-water systems and off-grid installations. No solar certification is claimed — the pump itself is a 24 V DC unit.
Each pump ships with an adapter that accepts AC 110 V / 220 V input, so the same pump runs on mains through the adapter or off-grid on 24 V DC.
DC models carry a 1-year warranty, against 2 years for the single-phase AC range.
All three models deliver 25 L/min at up to 25 m of head from a 200 W motor — enough for a tap, a shower or a water-heater line, not for whole-house supply.
Not sure a 25 L/min DC pump covers your line? Send the flow, head and power available on site — our export team reviews the duty and replies with a model recommendation within 24 hours.
Send your target market, the flow and head you need, and whether the site runs on 24 V DC, battery or mains. We confirm the model and the adapter setup in the quotation.
We use cookies
Essential storage keeps the site working. Analytics cookies are set only after you click Accept. If you decline, no analytics cookies are set. Cookie Notice