
Appointing a pump supplier in China is a decision about the next several years of your business, not about one shipment. A low unit price tells you nothing about whether the factory can repeat the same quality, support a warranty claim, or ship the same model twice. This checklist covers the five checks that matter before you appoint a supplier: the licence, the CE file, the test capability, the warranty terms, and the sample process.
Models used as examples in this article: SPS-90 intelligent vfd booster pump and ICP100F pm vfd smart booster pump, both listed in the single-phase single-stage centrifugal boosters grupie.
Business licence and export registration
Ask for the business licence and check that the registered name, address and legal representative match the company you are dealing with. Confirm the company is registered for export and has a traceable operating history. A manufacturer with a verifiable background — for example, a parent group founded in 1958 and PM VFD pump exports running since 2019 — can be checked against public records; a company that cannot show its licence cannot be checked at all.
Also confirm the factory address. A supplier that only gives a trading office address may not own the production it is selling, which matters when you need a production change or a quality investigation.
CE technical file verification
A CE mark is a declaration backed by a technical file and test reports, not a certificate you buy. Ask who issued the verification, which standards were tested, and whether you can see the certificate number. For example, our CE verification was issued by ECM under certificate number 0P230414.FMEUN01, and the number is published on our certificates page. If a supplier cannot show the file or the number, treat the CE mark as unverified.
Apply the same test to any other claim: a certification without a document behind it is a claim, not a fact. Ask for the document before you rely on it.
Test capability
A manufacturer should be able to test flow and head against a Q-H curve, run insulation and pressure tests, and show you the test setup — in photos or video, or on a factory visit. Ask what tests each unit passes before packing, and whether test results are recorded per serial number. If the supplier cannot describe its test process, it probably does not have one.
Test capability is also what makes the datasheet believable. A Q-H curve is only useful if the factory actually verifies units against it, so ask how the curve was produced and how often it is checked.
Ask for a sample test report and read it: a credible report names the model and serial number, the test date, and the measured flow and head against the curve — not just a pass stamp. If the supplier can only show a generic certificate with no unit behind it, the test process may not exist.
Warranty terms
Get the warranty in writing: how long it lasts, what it covers, and who pays freight on a claim. Confirm whether the period differs by model type — single-phase and DC models may carry different periods — and check whether spare parts are available and how quickly they ship. A verbal warranty is not a warranty.
Also ask what happens when a unit fails in the field: who diagnoses it, what evidence is needed, and how a replacement is handled. The answer tells you more about the supplier than the warranty length does.
The sample process
Order a sample before a bulk order. Confirm the sample is the same specification as the quoted model — the same motor, the same controller, the same materials — and test it on a real installation: pressure holding, noise, and dry-run behaviour. Only discuss a bulk order after the sample has been evaluated.
A supplier that refuses samples, or sends a different specification from the one quoted, is a warning sign. A sample is the cheapest way to verify everything else on this checklist.
Next steps
Work through the five checks above, then verify the supplier against its own pages: the about page for company background and the certificates page for the CE verification. When you are ready, the how to order page explains the order process.
Ready to specify? Send your flow, head, power supply and pipe size through the inquiry form , or message the export team on WhatsApp .