Skip to main content

SCS100P SERIES

SCS100P-3Permanent Magnet Variable Frequency Multistage Stainless Steel Pump

The SCS100P-3 is the tallest-reaching pump Calliope makes: five stages from 0.55 to 1.5 kW lift water to 75 m, the highest in the range, at 115 to 165 L/min. It is also the largest multistage pump by flow, moving over double the SCS90P-3's 75 L/min through G 1.25-inch ports. Body, impeller and shaft are 100% stainless steel, with a ceramic shaft and bearing, and outlet pressure can reach inlet pressure plus 3.8 bar. Two buttons run it: the pump starts and stops itself as the household draws.

Moc znamionowa
0,55–1,5 kW (regulacja 5-stopniowa)
Maksymalny przepływ
165 L/min
Maksymalna wysokość podnoszenia
75 m
Zasilanie
170 - 260 V, 50/60 Hz
Modele w tej grupie P800-3SCS90P-3PYS-EPYPZ-ESCS100P-3
Pobierz kartę katalogową (PDF) Zamów próbkę
75 m Highest Head165 L/minFive Power Stages100% Stainless SteelG 1.25″ Ports170–260 V Wide Voltage

Kluczowe zalety

  • 75 m of head — the highest in the entire range, for high-rise and long-run boosting.
  • 165 L/min maximum flow — the highest of any multistage pump in the range.
  • Five power stages (0.55–1.5 kW), the widest power span of any model in the range.
  • 100% stainless wetted path — body, impeller and shaft — with G 1.25-inch ports.

Holds energy saving at 60% or more versus a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.

Dane techniczne

Electrical

Moc znamionowa
0,55–1,5 kW (regulacja 5-stopniowa)
Power stages
5 adjustable power stages
Zasilanie
170 - 260 V, 50/60 Hz

Hydraulic

Maksymalny przepływ
165 L/min
Maksymalna wysokość podnoszenia
75 m
Maximum suction lift
7 m
Hałas
Water-cooled, fanless, low-noise operation
Wlot
G 1.25 in (32 mm)
Wylot
G 1.25 in (32 mm) (same as inlet)

Construction and environment

Pump body and wetted parts
Stainless steel · Ceramic shaft and bearing
Motor type
Permanent magnet motor with integrated variable frequency drive
Liquid temperature range
5–70 °C, pH 6.5–8.5
Ambient temperature range
0–40 °C, RH max. 85%
Solids in the liquid
No solid particles or fibres (smaller than 0.2 mm)

SCS100P-3 power stage data

Flow and head at each power stage for this model.

StopieńStopieńMoc (kW)Moc (HP)Prąd (A)Maks. przepływ (L/min)Maks. wysokość podnoszenia (m)Ssanie (m)
Power 10.550.550.753.8115467
Power 20.750.751.05.1125587
Power 30.900.901.26.1135657
Power 41.11.11.57.2145757
Power 51.51.52.09.4165757

Krzywa wydajności

Wysokość podnoszenia w funkcji wydajności zgodnie z katalogiem, z osiami metrycznymi.

Krzywa wydajności · SCS100P-3Wysokość podnoszenia względem wydajności, osie metryczne
0 m20 m40 m60 m80 m0 L/min25 L/min50 L/min75 L/min100 L/min125 L/min150 L/min166 L/minWydajność Q (L/min)Head H (m)
Power 1Power 2Power 3Power 4Power 5

Warunki pracy

Limity pracy i warunki medium opublikowane dla tego modelu.

Pompowana ciecz
Clean, thin, non-solidifying, non-flammable and non-explosive liquid
Solids
No solid particles or fibres (smaller than 0.2 mm)
Max. working pressure
10 bar
Liquid temperature
5–70 °C, pH 6.5–8.5
Temperatura otoczenia
0–40 °C, RH max. 85%
Hałas
Water-cooled, fanless, low-noise operation

Wymiar całkowity

All dimensions in millimetres unless stated otherwise. Dimension references Width a, Height b, Depth c, Port offset d, Port offset e are printed on catalog page 13.

Model Wymiary Waga
SCS100P-3
  • Wlot G 1.25"
  • Wylot G 1.25"
  • a 256 mm
  • b 102 mm
  • c 102 mm
  • d 146 mm
  • e 120 mm
  • f 8 mm
  • g 82 mm
  • h 240 mm

Zastosowania

High-rise and long-run boosting — the range's tallest head and largest multistage flow for multi-storey homes and small buildings.

  • Wille i domy wielopiętrowe
  • Rooftop Tank & Water Tower Boosting
  • HVAC System

Uwagi dotyczące instalacji

  • Liquid condition: No solid particles or fibres (smaller than 0.2 mm).

Opakowanie

Informacje o pakowaniu opublikowane dla tego modelu.

Opakowanie
Carton with Plywood Tray
Rozmiar kartonu
27 × 19.5 × 28 cm

Informacje o zamawianiu

Ordering information for this model.

MOQ and packaging
Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
Lead time
30 days
OEM / ODM
Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
Przyłącze
G 1.25 in (32 mm)

Warranty: 2 yearsGwarancja i serwis posprzedażowy

Wskazówki doboru

Jak SCS100P-3 jest zestawiona z resztą oferty.

  • Choose SCS100P-3 when the duty needs up to 165 L/min at 75 m and the building has several outlets on one riser.
  • Power 1 to Power 3 cover routine villa demand; Power 4 and Power 5 serve peak draw on multi-storey systems.
  • Keep the suction lift within 7 m and the working pressure within 10 bar.

Zasilanie i oznakowanie CE

Zasilanie i certyfikacja dla tego modelu są wymienione w danych technicznych powyżej. Oferta posiada oznakowanie CE dopuszczające do sprzedaży na terenie Europejskiego Obszaru Gospodarczego; dokumentacja techniczna została zweryfikowana przez ECM, certyfikat nr 0P230414.FMEUN01.

Pliki do pobrania

Karta katalogowa, krzywa wydajności i dane wymiarowe dla tego modelu.

  • kartę katalogową

    Model, key specifications, power stage data and packing details generated from the catalog data on this page.

  • Performance Curve

    Head and flow curve for this model, redrawn from the catalog axis ranges.

  • Dimension Data

    Dimension table for each model in the range, in millimetres and inches.

Praca nad an SCS100P-3 projekt? Wyślij punkt pracy, rynek i wolumen, a zespół eksportu potwierdzi konfigurację.

Używamy plików cookie

Niezbędne pliki są potrzebne do działania strony. Pliki cookie analityczne są ustawiane dopiero po kliknięciu „Akceptuj”. W przypadku odmowy nie są ustawiane żadne pliki cookie analityczne. Informacja o plikach cookie